Marble restoration in Dubai
Yes. Dull marble is almost never dirt. It is microscopic surface damage: thousands of fine scratches from foot grit plus etching where something acidic reacted with the stone. Diam...
Can dull or scratched marble really be restored?
Yes. Dull marble is almost never dirt. It is microscopic surface damage: thousands of fine scratches from foot grit plus etching where something acidic reacted with the stone. Diamond grinding removes that damaged layer entirely, and successive honing and polishing stages re-form the surface. In most cases the result is indistinguishable from new. Downtown Services carries out full marble restoration across Dubai from AED 349, with a test panel approved by you before the whole floor is committed.
- Starting price
- AED 349
- Output
- 60 to 100 sqm per day
- Finish options
- Matte, honed, satin, polished, crystallized
- Included
- Penetrating sealer and written aftercare
Fixed written quotation
Issued before a single tool comes out of the van.
No-obligation site survey
Free of charge on any job that cannot be priced honestly by phone.
Written warranty
On labor and on every component we supply.
Directly employed teams
Trained, uniformed, insured, never day labor.
Marble, travertine and limestone are soft, porous and chemically reactive. They are also the finish most often specified in premium UAE property, which means a great deal of expensive stone is quietly being damaged by the wrong cleaning product.
Restoration is a mechanical process, not a chemical one. Anything that promises a mirror finish in two hours with no dust and no slurry is a coating, and coatings wear off in walkways within weeks.
What does the process actually involve?
- Identification and survey. Material identified, damage measured, a small area tested to establish how the stone responds.
- Test panel. A sample area restored so you see and approve the finish level in your own lighting before anything else is touched.
- Containment. Skirtings, joinery, doorways and adjoining rooms protected; dust and water managed.
- Grinding. Coarse diamond abrasives remove the damaged layer and correct lippage between tiles.
- Honing. Successive finer grits refine the surface toward the approved finish. Skipping grits is the most common shortcut and shows as haze under raking light.
- Polishing or crystallization. Reflectivity brought up mechanically, or a harder high-gloss layer formed where traffic demands it.
- Grout and tile works. Grout cleaned, color sealed or replaced; hollow or cracked tiles lifted and re-fixed.
- Sealing and handover. Penetrating sealer applied and buffed, floor inspected with you under natural light, written aftercare provided.
Which finish should you choose?
| Finish | Appearance | Best suited to |
|---|---|---|
| Matte / honed | Flat, soft, no reflection | High traffic, bathrooms, anywhere slip resistance matters |
| Satin | Low sheen with depth | Living areas where a mirror finish feels too formal |
| Polished | Reflective, shows the stone's figure | Formal reception, lobbies, feature floors |
| Crystallized | Very high gloss, harder surface | Heavy traffic where the finish has to last |
There is no universally correct answer, which is why the test panel exists.
How do you spot a shortcut?
- No test panel offered before the whole floor is committed
- A large area finished in a couple of hours
- Strong chemical smell, instant gloss, no slurry produced
- Gloss gone within weeks, particularly in walkways
- No sealer applied and no aftercare guidance given
A genuine diamond process is wet, produces slurry, takes time and happens in stages. Roughly 60 to 100 square meters per day is realistic depending on condition.
What preserves the result?
- pH-neutral stone cleaner only. Never vinegar, lemon, bleach or general-purpose acidic products.
- Wipe spills immediately, especially wine, citrus, coffee and bathroom products
- Mats at every external door, because sand is the abrasive doing the damage
- Felt pads under all furniture
- Re-seal every two to four years depending on traffic
The most common cause of etched marble in UAE homes is a well-meaning cleaner using an acidic bathroom product on a stone floor. Tell whoever cleans your property, in writing, which product to use.
Questions we are asked about this
From AED 349, with the final figure depending on area, stone type, condition and the finish level chosen. You receive a fixed written quotation after survey and a test panel before the full floor is committed.
Roughly 60 to 100 square meters per day depending on condition and the number of stages required. We can phase the work room by room so the property stays usable.
It is a wet process but a contained one. Adjoining areas are sealed off, slurry is managed and extracted as we go, and the area is cleaned thoroughly on completion.
Polishing refines the stone mechanically with diamond abrasives and powders. Crystallization applies a chemical treatment under a weighted machine to form a harder, highly reflective layer. We advise which suits your stone and its traffic.
Yes, along with terrazzo and engineered stone. Each needs a different grit sequence, and travertine usually needs hole filling before honing.
Services that sit behind this
Where we deliver it
We cover 109 communities in total. See the full list.
Start with a survey, not a sales call
We will look at what you actually have, tell you what we find, and put it in writing before anyone talks about price.
- Fixed written quotation before any work begins
- Trained, uniformed, directly employed technicians
- Same-day attendance for genuine emergencies
- Written warranty on labor and supplied parts
- One accountable company for every trade