Electrical Services
Electrical work you never have to think about again.
What does electrical services cost in the UAE?
Electrical Services from Downtown Services starts from AED 349 per call-out. Every job is confirmed with a fixed written quotation before work begins, delivered by directly employed technicians and covered by a written warranty. We cover 109 communities across Dubai, Abu Dhabi and Sharjah. Call +971 50 705 3034 or book online.
- Starting price
- AED 349 per call-out
- Sub-services
- 5 options
- Coverage
- 109 UAE communities
- Warranty
- Written, on labor and parts
Fixed written quotation
Issued before a single tool comes out of the van.
No-obligation site survey
Free of charge on any job that cannot be priced honestly by phone.
Written warranty
On labor and on every component we supply.
Directly employed teams
Trained, uniformed, insured, never day labor.
Electrical Services done properly
Electrical faults are the category where cutting corners has the most serious consequences. A nuisance-tripping breaker, a warm socket faceplate or a light that flickers under load is the system telling you something specific, and it deserves a proper investigation rather than a bigger fuse. Our electricians carry out fault finding, distribution board upgrades, rewiring, lighting design and installation across villas, apartments and commercial premises.
All work is carried out to the standards expected by DEWA and ADDC, with testing and certification on completion. Circuits are labeled, loads are calculated, protective devices are correctly rated, and earthing is verified, because the parts of an electrical installation nobody looks at are exactly the parts that keep a property safe.
Every job is confirmed with a fixed written quotation before work begins.
Book a Service Call +971 50 705 3034What our electrical services covers
- Fault finding on tripping circuits, dead sockets and intermittent supply
- Distribution board upgrade, RCBO and RCD protection installation
- Full and partial rewiring for villas, apartments and commercial units
- Lighting design, supply, installation and dimming control
- Socket, switch, data point and EV charger installation
- Earthing verification, insulation resistance testing and certification
When you should call us
- A breaker that trips repeatedly, particularly under load
- Socket faceplates or switches that feel warm to the touch
- Lights that dim or flicker when a large appliance starts
- A burning or fishy smell near the distribution board or a socket
- An old rewireable fuse board with no residual current protection
- Not enough sockets, so extension leads are permanently in use
Electrical options and prices
Book any option individually, or combine several into one scheduled visit.
| Electrical option | Price |
|---|---|
| Electrical Fault Finding & Repair Systematic diagnosis of tripping, dead or intermittent circuits. | From AED 349 |
| Distribution Board Upgrade Modern protection, correctly rated and properly labeled. | From AED 1,299 |
| Lighting Design & Installation Lighting that flatters the property rather than flattening it. | From AED 449 |
| Wiring & Rewiring Works New circuits or a complete installation renewal. | From AED 1,899 |
| EV Charger Installation A dedicated, protected and certified charge point. | From AED 1,499 |
Starting prices shown. Your final figure is confirmed in a fixed written quotation before any work begins.
Electrical Fault Finding & Repair
Systematic diagnosis of tripping, dead or intermittent circuits.
- Circuit-by-circuit insulation resistance testing
- Earth fault loop and RCD verification
- Thermal inspection of the distribution board
- Permanent repair with test results supplied
Distribution Board Upgrade
Modern protection, correctly rated and properly labeled.
- RCBO or RCD-protected board installation
- Load calculation and circuit redistribution
- Full circuit labeling and schedule
- Testing and certification on completion
Lighting Design & Installation
Lighting that flatters the property rather than flattening it.
- Layered lighting design for each room
- Downlight, cove, track and feature installation
- Dimming and smart control integration
- Landscape and facade lighting
Wiring & Rewiring Works
New circuits or a complete installation renewal.
- Full or partial property rewiring
- Additional socket, switch and data points
- Correct cable sizing and containment
- Chasing, patching and redecoration included
EV Charger Installation
A dedicated, protected and certified charge point.
- Supply capacity and load assessment
- Dedicated protected circuit installation
- Wall or pedestal charge point mounting
- Authority coordination, testing and certification
Electrical Services
Fixed written quotation issued before work begins, with a written warranty on completion.
How electrical services is executed
The instruments we carry, the values we record, the standards we work to and the materials we install. Ask any contractor for the same four lists before you compare prices.
Instrumentation on the van
- Insulation resistance tester (500V/1000V)
- Earth fault loop impedance tester
- RCD trip-time tester
- True-RMS clamp meter and power-quality logger
- Thermal imaging camera for terminations
- Calibrated torque screwdriver
Values we measure and record
- Insulation resistance, line-earth and line-neutral, per circuit
- Earth fault loop impedance (Zs) against the protective device rating
- RCD trip times at rated and five-times rated residual current
- Polarity, continuity of protective conductors and prospective fault current
- Load per phase and phase balance at the distribution board
- Termination temperature rise under load
Standards and method
- Installation and certification to DEWA expectations in Dubai and ADDC in Abu Dhabi
- IEC 60364-aligned inspection and test sequence
- Protective devices selected by cable CSA, installation method and grouping
- Every circuit labeled and a schedule issued with the board
Materials and components
- RCBO and RCD-protected boards from recognized manufacturers
- Copper conductors correctly sized, never aluminum substitution on final circuits
- Approved containment, glands and fire-stopping at penetrations
Our seven-stage method
Every electrical services job follows the same documented seven-stage method, whether it is a single call-out or a full building program.
Fault description and safety triage
We take the details of the symptom and advise immediately whether the circuit should be isolated before we arrive. Anything with a burning smell or visible heat damage is treated as urgent.
Survey and load assessment
The electrician inspects the distribution board, tests circuits, measures loads and checks earthing and bonding. Existing circuit labeling is verified rather than trusted.
Diagnosis and fixed written quotation
You receive a plain explanation of the fault, what caused it, and a fixed price. Where the safe answer is a board upgrade rather than a repair, we explain exactly why.
Isolation, permits and property protection
Supply is isolated safely, warning notices are placed, and work areas are protected. Building permits and DEWA or ADDC coordination are arranged where the scope requires it.
Installation to standard
Cable is sized to the load and route, protective devices are correctly rated, terminations are torqued properly and every circuit is labeled. Chased routes are made good as part of the work.
Testing and certification
Continuity, insulation resistance, polarity, earth fault loop impedance and RCD operation are all tested and recorded. Nothing is energized for handover until the readings are correct.
Handover, documentation and warranty
You receive a test record, an updated circuit schedule for the board and a written warranty. We walk you through anything that has changed in how the installation operates.
What sets our electrical services apart
- Work carried out and certified to DEWA and ADDC expectations
- Full test results recorded and handed over, not simply declared safe
- Distribution boards left correctly labeled with an updated circuit schedule
- Chasing, patching and painting made good as part of the electrical scope
- Electricians experienced with villa, high-rise and light commercial installations
- Directly employed, trained and uniformed technicians
- Fully insured works with a written warranty on completion
- Transparent pricing: cleaning from AED 299, technical from AED 349
- Same-day attendance for genuine emergencies
- One accountable company across every trade
Electrical in your community
We publish a dedicated page for electrical services in every one of the 109 communities we serve, so you can see local considerations and response times before you call.
Four good reasons to book this week
These apply to every service we run, on every property type, without small print you have to hunt for.
Same-day slots
We hold a limited number of same-day slots each morning for urgent AC, plumbing and electrical faults. Call before 11:00 and we will tell you immediately whether one is free.
Two services, one visit
Book any two services at the same property on the same visit and the second is discounted by 10%. One trip, one team, one invoice.
Diagnosis you do not pay twice for
If we diagnose a fault and you go ahead with the repair, the diagnosis is absorbed into the job. You are never charged twice for the same visit.
Annual contract credit
Take out an annual maintenance contract within 30 days of any completed job and the value of that job is credited against your first contract year.
Electrical, frequently asked questions
A repeatedly tripping breaker is either an overload, a genuine earth fault or a failing device. We test the circuit under load, use insulation resistance testing to find the fault and repair the cause. Replacing the breaker with a larger one is never the answer.
If your board has rewireable fuses, no residual current protection, or is full with no spare ways, an upgrade is strongly advised. Modern RCBO protection isolates only the faulty circuit rather than plunging the whole property into darkness.
Yes. We assess the incoming supply capacity, run a dedicated protected circuit, install the charge point and test and certify the installation, including coordination with the authority where approval is required.
Yes, both full and partial. Rewiring is phased so the property remains usable, and all chasing, patching and redecoration is included in the scope rather than left for you to arrange.
Yes. Every installation is tested and you receive a written record of the results along with an updated circuit schedule for the distribution board.
Yes. We carry out lighting design for villas and apartments, covering layer, color temperature and control, and install everything from recessed downlights and cove lighting to feature and landscape schemes.
Book electrical services with one accountable company
Call, WhatsApp or send the form. Fixed quotation before work begins, every time.
- Fixed written quotation before any work begins
- Trained, uniformed, directly employed technicians
- Same-day attendance for genuine emergencies
- Written warranty on labor and supplied parts
- One accountable company for every trade
Get a fixed price for electrical services
Send us the details of your property and we will respond with an itemized quotation, usually within one working hour.